Multi Heads Automatic Screw Dispenser (most 24 screwdrivers)
Basic Info
Model No.: RESM010
Product Description
Multi Heads Automatic Screw Dispenser
Functional characteristics:
1.. Efficiency of up to 900 hours per hour, up to a lock at the same time, the 24 screws, can replace a number of workers, cost-effective, within one year of recoverable costs.
2.. Machine on the side of the belt line, artificial just take the product, easy to operate the machine.
3.. Automatic lock screw and determine whether the OK, if there is a defective machine will automatically identify and alarm.
4.. Power transmission through the universal transmission shaft torque screw, the position of the lock screw can be adjusted in the direction of X--Y--Z, the replacement of the product variety fast and easy.
5.. Machine universal good, simple settings on the screen, you can lock any number of 2--24 screws products.
6.. With a mechanical lifting type automatic nail feeding machine through the pipeline conveying screws, nail fast and accurate, artificial only need to put the screws into the hopper.
 | |
| | |
Machine Parameter:
| Machine structure | Enlarged edition(8-16screwdrivers) | 900x1300x1700 380KG |
| Standard Edition(5-12 Screwdrivers) | 700x1200x1700 320KG | |
| Compact Edition(4-8 screwdrivers) | 600x1000x1700 240KG | |
| Desk type(Less than 4 screwdrivers) | 450x1000x1100 110KG | |
| Power Supply | AC 220V 50HZ | |
| power | 0.5KW | |
| Gas source | >0.5KG/CM2 | |
| Gas consumption | 25M3/hour | |
| Lock up and down adjustment range | 200mm | |
| Control specification | Host program control | NC Control |
| Interface | Display and adjust parameters | |
| Screw feeder | Automatic screw feeder | In accordance with the number of screws to choose |
| Request signal | DC24V pulse,can communicate with PLC or host processor | |
| Send the feedback signal | To host processing or PLC | |
| Screwdriver | Screwdriver | Multiple pcs, torqu:2-12kgf.cm,The special needs another choose |
| Screw clamp | Screw clamp | Multiple sets,according to the quantity of screws |
| Connect | Universal joint drive shaft assembly | Multiple sets,work with screw clamp |
| Processing range (Range of screw on product) | Enlarged edition( 8-16 screwdrivers) | 600x500x150mm(Range of screw on product) |
| Standard Edition(4-12 screwdrivers) | 420x300x150mm(Range of screw on product) | |
| Compact Edition(4-8 screwdrivers) | 320x250x150mm(Range of screw on product) | |
| Desk type(Less than 4 screwdrivers) | 250x180x100mm(Range of screw on product) | |
| Horizontal adjustment range | Small adjustment:±25mm,replaceable position adjustment to:±100mm | |
| Vertical adjustment range | ±5mm,Replacement parts can be achieved ±15mm | |
| Screw locking depth | 20mm,if you want a deeper need customized | |
| Minimum screw pitch | 20mm,maximum hole distance unlimited | |
| Test items | Screwdriver torque test | Yes |
| screwloos,slippery detection | Yes | |
| Screw leakage lock detection | Yes | |
| Screw leakage send detection | Yes | |
| Handling of defective products | Alarm, touch screen display defective product location |
Versatility of multi head automatic locking screw machine
Multi head automatic locking screw machine with high efficiency, simple operation and maintenance, high cost, such as bad screws can automatically identify and alarm, and the screw claw adjustable spacing in the X--Y--Z direction, replace the product easy, good versatility.1.The number of screws on the product can be reduced to a general purpose machine (just operate the display screen to shield the redundant power supply and nail delivery pipeline)
2.If the length of the screw (L1) is different, but the size (d) unchanged, the machine can be generic, just adjust the position of the claw can be.
3.If the size of the screw (d), the replacement of automatic nail feeding machine screw claw can be used (quick plug, automatic nail feeding machine replaced a communication cable plug screw claw fixed with screw connection, convenient disassembly and assembly).
4.Screw size should satisfy formula L>1.3D, otherwise it will flip screw in the pipeline (see photo shows the automatic nail feeding machine).
5.The minimum distance between the screw holes should be not less than 25mm (see photo).
6. About us:
Dongguan Rener Automation Technology Co., Ltd. is a high-tech enterprise engaged in R & D, industrial non-standard machinery and equipment production, sales and service automation.Our products are widely used in automatic production of standard fasteners, Hardware Accessories, auto parts, electronic parts, electrical appliances, plastic hardware, locks, medical equipment accessories, cosmetics, sanitary products and other industries. Undertake mobile phone connector, automotive, medical, hardware, wire, all kinds of consumer electronic products, sanitary products and other non-standard automation equipment R & D project development, to undertake a variety of plastic hardware products production line, assembly line, automatic machine manufacturing, design various automation solutions.Effective for the enterprises to solve the problems in high cost, low efficiency and serious quality, recruitment difficulties, labor trouble etc...For all enterprises to save resources, improve efficiency, achieve social harmony and win-win and customer.
Our main products: plastic & Hardware assembling machine, sanitary assembly machine, automatic locking screw machine, spring separating feeder machine, we developed a number of sanitary assembly line has been successfully put into production in the Middle East.
We have experienced technical backbone and a strong engineering team, and provide overseas machine commissioning and overseas training experience and service, make the enterprise production line put into production, we provide technical support and thoughtful pre-sale customer service for customers in the industry field, we will make unremitting efforts to strive for the majority of customer service. Dongguan Rener automation technology limited company's good faith, strength and quality of products recognized by the industry. Welcome friends from all world of life come to visit, guidance and business negotiation 
7. Customer Service:
1) Warranty period:1 years (Non-human damage and other factors)
2) Provide logistics, customs service and foreign installation ,commissioning and operator training service for the machine.
After services:
FAQ
1. How long will your engineer reach our factory?Within one week after machine arrival your factory.
2. How many days will you finish installing & commissioning ?
We will finish installation,commissioning and training within 15-25days.
3. What should we charge for your engineer?
You should charge for the cost of our engineer's visa, air tickets, hotel, food, and also their salary 50USD one day per person.
4. How long is your machine's warranty period?
All our machine have one year guarantee, starting from finished installation.
5. How could we do after one year warranty period?
We also can do service for you, but you need pay salary for my technician 80USD/day.
6. How could we do if the parts broken within warranty?
We would express the free replacement parts during the warranty date.
7. Does your engineer understand English?
Our engineers understand a little English. All of our engineer have more than five years machine installation experience. In addition, they can use body language to communicate with customer.
Pls Note:
Product Categories : Automatic Screw Machine > Automatic locking Screw Machine